Disposal hums but will not turn
A steady hum often means the motor has power but the grinding mechanism is stalled. A jam is common, but a seized or failing motor can create a similar symptom.
FREE Service Call With Paid Repair
Garbage Disposal Repair in Denton, Plano & North Dallas
Garbage disposal humming but not turning, completely dead, leaking under the sink, tripping the reset, draining slowly or making a metal grinding noise? AGB diagnoses residential garbage disposals across Denton, Plano and nearby North Dallas communities. We check whether the problem is a jam, electrical issue, leak, drain connection or worn-out disposal before recommending repair or replacement.
Same-day and next-day appointments may be available when the address, technician route and schedule allow.
$70 Diagnostic VisitWaived when AGB completes the approved repair.
Repair or ReplacementWe check the actual failure before telling you which option makes sense.
90-Day Repair WarrantyOn the parts and labor used for the completed repair.
Price Before WorkYou see the repair or replacement quote before work starts.
Check AGB Before You Book Read current customer feedback on Google, Yelp and Thumbtack.
What Is Your Garbage Disposal Doing?
A disposal that hums, one that stays completely silent, and one that runs but leaks need different checks. Start with the symptom you can actually see or hear.
Free service call with completed repair. The $70 diagnostic fee is waived when AGB completes the approved garbage disposal repair.
Call About Your Disposal Request Repair OnlineCommon Garbage Disposal Problems We Repair
The noise matters. So does where the water is coming from. We use those details to narrow the problem before replacing a disposal that may only be jammed or have a connection issue.
Safety first: Never put your hand into a garbage disposal. If you are checking for a visible obstruction, turn the disposal off and disconnect power at the breaker or unplug it first. If water is leaking near electrical connections, stop using the unit until it is checked.
Garbage disposal will not turn on
If the unit is completely silent, we check the reset, outlet or hardwired power, wall switch, breaker, wiring and motor circuit instead of assuming it is mechanically jammed.
Reset button keeps popping out
The overload protector may trip when the disposal jams, overheats or pulls too much current. A reset that trips again quickly means the cause still needs to be found.
Disposal leaks under the sink
The leak may be at the sink flange, mounting assembly, dishwasher inlet, discharge tube or the disposal body itself. Leak location changes whether repair or replacement makes sense.
Metallic, rattling or grinding noise
Foreign objects can create sharp rattling or metallic noise. Continued operation can damage internal grinding components, so turn the disposal off if the sound is new or severe.
Sink drains slowly with disposal
Slow drainage can come from food buildup in the disposal or drain path, but it can also be a plumbing clog. We separate disposal operation from a drain-line problem before recommending appliance work.
Bad smell from the disposal
Odor is often caused by food residue in the grinding chamber, splash guard or connected drain path. A smell by itself does not always mean a mechanical failure.
Disposal runs but does not grind well
If the motor runs but food is not being processed normally, internal wear, stuck grinding components or a partial obstruction may be involved. Older units may be more sensible to replace.
Tell us whether the disposal hums, stays silent, leaks, trips the reset, drains slowly or makes a new metal noise. That is more useful than guessing which part failed.
Call (214) 842-6679 Request Disposal RepairWhat the Technician Checks
We follow the symptom. A humming disposal is tested differently from a silent one, and an electrical problem is handled differently from a drain or mounting leak.
- Reset and overload protector behavior
- Wall switch and power supply
- Outlet or hardwired electrical connection
- Mechanical jam or foreign object
- Motor and grinding mechanism movement
- Sink flange and mounting assembly
- Dishwasher drain-hose connection
- Discharge tube and drain connections
- Leak location and disposal housing
- Overall condition before repair or replacement
Humming Does Not Mean the Motor Is Dead
If a disposal hums when the switch is turned on, it is receiving power and trying to run. A mechanical jam can keep the turntable and grinding components from moving even though the motor is energized.
That is why the first question is not "Which motor do we order?" It is whether the unit can turn freely after power is safely disconnected and the obstruction is cleared.
If the disposal still cannot turn, repeatedly trips its overload or the motor is damaged, replacement may make more sense than further repair.
Do not keep cycling the switch on a humming disposal. A stalled motor can overheat and trip the overload protector.
Where Is the Garbage Disposal Leaking?
Leak location is one of the fastest ways to separate a connection problem from a disposal that may need replacement.
Sink flange / top mount
Mounting assembly
Dishwasher inlet
Discharge tube
Drain connection
Bottom or housing seam
Loose plumbing connection
Water from another sink component
A Leak Near the Disposal Is Not Always the Disposal
Water under a kitchen sink can travel before it drips. The source may be the sink flange, dishwasher hose, discharge connection, faucet plumbing or another drain connection.
We trace the leak while the sink, dishwasher connection and disposal are operating so the repair is aimed at the actual source.
Dishwasher Not Draining After Disposal Work?
The dishwasher drain often connects to the garbage disposal. If a dishwasher problem started after a new disposal was installed, that connection becomes part of the diagnosis.
If the disposal works normally but the dishwasher still leaves water inside, the problem may be on the dishwasher side instead.
View Dishwasher RepairRepair or Replace the Garbage Disposal?
Some disposal problems are worth repairing, especially a jam, loose connection, mounting leak or simple electrical issue. Other failures make replacement the cleaner option.
- Age and overall condition of the unit
- Where the disposal is leaking
- Motor condition
- Repeated overload or breaker trips
- Internal corrosion or housing damage
- Cost of repair versus a replacement unit
Replacement Is Not Automatically the Answer
A jammed disposal can sound terrible and still be repairable. On the other hand, spending labor on an older unit with a damaged motor or leaking body may not make financial sense.
We diagnose the failure first, then give you the repair or replacement price so you can make the decision with real numbers.
AGB can replace an existing residential garbage disposal when replacement is the practical option. New plumbing layouts or broader drain-line work may require a plumber.
Residential Garbage Disposals We Service
Send the brand and model number if you can see the label under the sink. Mounting style, horsepower and replacement fit can vary by unit.
Continuous-feed disposals
Batch-feed disposals by model
Standard residential disposals
Quiet / insulated models
Existing disposal replacement
Dishwasher-connected disposals
Plug-in disposals
Hardwired disposals by existing setup
Garbage Disposal Brands We Service
AGB works on many common residential disposal brands. Model and parts availability matter, especially on older units.
InSinkErator
InSinkErator Badger series
Waste King
Moen
KitchenAid
GE
Whirlpool
Selected other residential models
Send the exact brand and model number when scheduling. We will confirm whether the unit and any needed parts fit our current service scope.
Four Details That Help Before the Visit
You do not need to remove the disposal. Just tell us what you see and hear.
A hum points toward a stalled mechanical system. Silence pushes power, reset and switch checks higher on the list.
Top mount, dishwasher hose, side discharge, drain connection or bottom of the disposal. A photo helps.
Tell us whether the reset button stays in after the unit cools or pops again as soon as you try to run it.
The label is usually visible on the body of the disposal under the sink. A quick photo is often easiest.
How Garbage Disposal Service Works
We diagnose first, explain whether repair or replacement makes sense, and give you the price before work starts.
Tell us the symptom
Share the brand, model if available, whether the unit hums or stays silent, where it leaks, and whether the sink or dishwasher is also backing up.
We test the disposal and connections
The technician checks the mechanical, electrical, mounting and drain areas tied to the complaint and identifies whether the disposal itself is the problem.
Approve repair or replacement
You get the price first. If AGB completes the approved repair, the $70 diagnostic fee is waived and the completed repair includes the 90-day parts-and-labor warranty.
Garbage Disposal Repair Service Areas
Choose your city for local appliance repair information. Appointment availability depends on address and technician route.
Denton County and Nearby Communities
Residential garbage disposal repair and replacement from the Denton service location and nearby routes.
Plano, Collin County and North Dallas
Residential garbage disposal repair and replacement from the Plano service location and nearby North Texas routes.
Garbage Disposal Repair FAQs
Quick answers to the questions homeowners ask when the disposal jams, hums, leaks or stops turning on.
How much does garbage disposal repair cost?
The final price depends on the disposal, the failure and whether repair or replacement is needed. The diagnostic visit is $70. After the unit is checked, you get the price before deciding whether to move forward.
Is the garbage disposal diagnostic fee waived with repair?
Yes. The $70 diagnostic fee is waived when you approve the quote and AGB completes the garbage disposal repair. If no repair is completed, the diagnostic fee applies.
Do you offer same-day garbage disposal repair?
Same-day and next-day appointments may be available. The earliest opening depends on your address, technician route and appointments already on the schedule.
Why is my garbage disposal humming but not spinning?
A humming disposal is getting power but the grinding mechanism is not turning. A jam is common, but a seized or damaged motor can cause a similar symptom. Do not keep cycling the switch because a stalled motor can overheat.
Why will my garbage disposal not turn on at all?
If the disposal is completely silent, the reset or overload protector, wall switch, outlet or hardwired connection, breaker, wiring or motor may be involved. A silent disposal is not automatically a mechanical jam.
Why does the garbage disposal reset button keep popping out?
The overload protector can trip when the disposal is jammed, overheated or drawing too much current. If the reset trips again after the unit cools and the jam is cleared, the disposal needs further diagnosis.
Can I unjam a garbage disposal myself?
Some jams can be cleared using the manufacturer-approved wrench or procedure with power disconnected. Never put your hand into the disposal. If the unit will not turn freely, repeatedly trips the reset, leaks or makes a severe metallic noise, stop and have it checked.
Why is my garbage disposal leaking?
A disposal can leak at the sink flange, mounting assembly, dishwasher inlet, discharge tube, drain connection or disposal housing. Finding the actual leak point is important because some connection leaks are repairable while a damaged disposal body may make replacement more practical.
Why does my garbage disposal smell bad?
Odor often comes from food buildup inside the grinding chamber, splash guard or connected drain path. A smell alone does not necessarily mean the motor or disposal assembly has failed.
Why is my sink draining slowly even though the disposal runs?
If the disposal turns normally but water still drains slowly, there may be a restriction in the disposal outlet or farther down the drain line. A clog beyond the disposal can be a plumbing problem rather than an appliance failure.
Can a garbage disposal cause a dishwasher not to drain?
Yes, the dishwasher drain hose often connects to the disposal. A blocked connection or an installation issue can affect dishwasher drainage. If the disposal connection is clear and working correctly, the dishwasher itself may need diagnosis.
Should I repair or replace my garbage disposal?
It depends on the failure, age, motor condition, leak location, overall condition and cost. A jam or connection issue can be worth repairing. An older unit with a damaged motor, repeated electrical trips or a leaking body may be more practical to replace.
Do you replace existing garbage disposals?
Yes. AGB can replace many existing residential garbage disposals when replacement is the practical option. Work that requires a new plumbing layout or broader drain-line modification may need a plumber.
Which garbage disposal brands do you repair?
AGB services many residential disposals from InSinkErator, including Badger models, Waste King, Moen, KitchenAid, GE and Whirlpool. Other brands may be accepted depending on the exact model and parts availability.
Do garbage disposal repairs include a warranty?
Completed garbage disposal repairs include a 90-day warranty on the parts and labor used for that repair. The technician explains the coverage when the job is completed.
Which North Texas areas do you serve for garbage disposal repair?
Garbage disposal repair is available in Denton, Plano, Frisco, McKinney, Prosper, Lewisville, Flower Mound, Highland Village, Lake Dallas, Corinth, Dallas and nearby North Texas communities based on technician route and scheduling availability.
Service information reviewed August 17, 2026.
Garbage Disposal Still Humming, Leaking or Dead?
Call AGB or send the appointment form with the brand, model if visible, what the disposal sounds like, where it leaks, whether the reset stays in and your ZIP code. We will check the next available time for your address.